Need help?Do you have a question about the Dell EMC S5200F-ON Series and is the answer not in the manual?
General| Model | S5200F-ON |
|---|---|
| Product Type | Switch |
| Form Factor | 1U |
| Latency | < 1 µs |
| RAM | 16 GB |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 5% to 95% non-condensing |
| Product Series | S5200F-ON Series |
| Category | Data Center |
| Power Supply | Dual hot-swappable power supplies (1+1 redundancy) |
| Cooling | Front-to-back airflow |
| Fans | Hot-swappable |
| Operating System | Dell EMC Networking OS10 |
| CPU | Intel x86 |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Management | CLI, Web, SNMP |
| Dimensions (H x W x D) | 1.73 in x 17.1 in x 22 in |
Details regulatory models and types for the S5200F-ON Series switches.
Lists related Dell EMC documentation for the S5200F-ON Series switches.
Explains the icons used in the guide for notes, cautions, and warnings.
Guidelines for choosing a secure installation location for network equipment.
Requirements for installing the switch in indoor cabinets for optimal environment.
Instructions for grounding the equipment rack before mounting the switch.
Dell EMC recommendations for grounding the S5200F-ON Series switch.
Information on switch airflow configurations and ventilation requirements.
Guidelines for connecting the switch to the appropriate power source.
Proper storage guidelines for the S5200F-ON Series switch and components.
Procedure for unpacking the S5200F-ON Series switch and verifying contents.
Instructions for attaching the ground cable to the switch using M4 screws.
Methods for mounting the switch on a rack shelf or directly into a 19-inch rack.
Safety guidelines for rack loading, power, airflow, and grounding.
Instructions for installing the S5212F-ON switch using a dual-tray in a four-post rack.
Procedure for installing one or two half-U switches into a four-post rack-mounted dual tray.
Steps to remove the S5212F-ON switch from a dual tray.
Installing the ReadyRails system for S5248F-ON, S5232F-ON, and S5224F-ON switches.
Guide for installing rails into square-hole racks using a tool-less method.
Instructions for installing rails for two-post flush-mount configurations.
Procedure for installing rails for two-post center-mount configurations.
Instructions for installing rails for four-post threaded rack configurations.
Configuring and attaching inner switch rails to the S5200F-ON Series switch.
Diagram and explanation of the DC power connector and wiring block.
Specific DC power connection details for the S5212F-ON switch.
Guidelines for positioning and inserting optical transceivers into switch ports.
Procedure for removing optics from switch ports.
Steps and checks before powering on the S5200F-ON Series switch.
Information on using Dell EMC or third-party software after installation.
Safety considerations and guidelines for mounting the chassis in a four-post rack.
Steps for installing and removing the chassis from the rack.
Details the physical dimensions and weight of the S5200F-ON Series chassis.
Specifies operating and storage temperature, humidity, and rack clearance.
Lists AC power supply voltage, frequency, and thermal output specifications.
Details maximum current draw at different voltages for S5200F-ON Series switches.
Specifies maximum power consumption for various S5200F-ON Series models.
Details DC power input voltage range and maximum current at full load.
Guidance on accessing Dell EMC support site for documentation and technical assistance.
To Next Page