Need help?Do you have a question about the Dell EMC S5248F-ON and is the answer not in the manual?
General| Form Factor | 1U |
|---|---|
| Model | S5248F-ON |
| Product Series | PowerSwitch |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Jumbo Frame Support | Yes, up to 9216 bytes |
| Switching Capacity | 3.6 Tbps |
| Power Supply | Dual, hot-swappable |
| Operating System | OS10 |
| Management | CLI, Web, SNMP, REST API |
| Dimensions (W x D x H) | 17.3 x 22.5 x 1.7 in |
| Humidity | 5% to 95% non-condensing |
| Latency | Less than 1 μs |
| MAC Address Table Size | 128K |
| Features | VXLAN, MLAG |
| Ports | 48x 10/25GbE SFP28, 6x 100GbE QSFP28 |
Details requirements for site selection, environmental conditions, and access control.
Covers rack mounting procedures, grounding the rack and switch, and safety considerations.
Describes various rack mounting methods like ReadyRails, tool-less, and two-post installations.
Specific installation instructions for the S5296F-ON in a four-post rack due to chassis weight.
Covers connecting the ground cable and installing/removing optical transceivers.
Guides on powering up the switch, startup sequence, and procedures for switch replacement.
Covers installing, replacing, and connecting AC/DC power supplies and their respective cables.
To Next Page
