Need help?Do you have a question about the Dell EMC S5224F-ON and is the answer not in the manual?
General| Model | S5224F-ON |
|---|---|
| Jumbo Frame Support | Yes, up to 9216 bytes |
| Device Type | Ethernet Switch |
| Product Series | Dell EMC S5200-ON Series |
| Form Factor | 1U |
| Ports | 24 x 10/25GbE SFP28 |
| Switching Capacity | 1.2 Tbps |
| Power Supply | Dual redundant power supplies |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Management | ONIE |
| Cooling | Front-to-back airflow |
Guidelines for choosing an appropriate installation location for the switch.
Recommendations and requirements for placing the switch within a cabinet.
Instructions and considerations for physically mounting the switch in a rack.
Details on how to properly ground the switch for safety and performance.
Procedures for connecting the switch to a power source.
Detailed instructions for connecting the ground cable to the switch.
General instructions for connecting DC power to the switch.
Specific DC power connection procedure for the S5212F-ON model.
Steps for installing optical transceivers into the switch.
Steps and checks before powering on the switch.
To Next Page