Need help?Do you have a question about the Dell EMC S4112F-ON and is the answer not in the manual?
General| Product Type | Switch |
|---|---|
| Model | S4112F-ON |
| Power Supply | Dual redundant power supplies |
| CPU | Intel Atom C2538 |
| Flash Memory | 16 GB |
| Input Voltage | 100-240 VAC |
| Latency | Less than 1 µs |
| Operating Temperature | 0°C to 40°C |
| Management | CLI |
| OS Compatibility | Open Network Install Environment (ONIE) |
| OS | Dell EMC OS10 Enterprise Edition |
| RAM | 8GB |
| Form Factor | 1RU |
| Ports | 12 x 10GbE SFP+ ports |
Lists the key features and specifications of the S4112-ON Series.
Lists required and optional components for installing the switch.
Outlines the various available configurations for the S4112-ON Series.
Specifies requirements for the installation environment and location.
Details the steps and considerations for mounting the switch in a rack.
Explains the procedures for properly grounding the switch.
Steps for attaching the ground cable to the switch chassis.
Procedures for installing the switch into a rack or cabinet.
Detailed steps for installing and removing the switch from its mounting.
Steps and considerations for powering on the switch after installation.
Lists AC and DC power input voltage, current, and consumption.
Information on reaching Dell EMC support for technical assistance.
To Next Page