Need help?Do you have a question about the Dell EMC S5232F-ON and is the answer not in the manual?
Details regulatory models for S5232F-ON, S5248F-ON, and S5296F-ON switches.
Lists additional documentation for the S5200F-ON Series, including guides and release notes.
Explains the meaning of NOTE, CAUTION, and WARNING icons used throughout the guide.
Overview of the S5200F-ON Series switch, its capabilities, and port configurations.
Highlights the key features of the S5200F-ON Series switch, including ports and components.
Specifies the physical dimensions for the S5232F-ON, S5248F-ON, and S5296F-ON switch models.
Describes the LED indicators on the switch's I/O side and their function during ONIE operations.
Details the various LED states and their meanings for S5232F-ON, S5248F-ON, and S5296F-ON switches.
Lists essential components and conditions required for a successful switch installation.
Outlines the different hardware configurations available for the S5200F-ON Series switches.
Explains the function and location of the switch's pull-out luggage tag for identification.
Covers requirements for choosing an appropriate installation site, including environmental and security factors.
Provides guidelines for placing the switch within suitable indoor cabinets for optimal operation.
Details the process of preparing and grounding the equipment rack for switch installation.
Explains the importance and procedure for grounding the switch for safety and compliance.
Describes the switch's fan support for two airflow options: normal and reverse.
Discusses fan installation, SKU types, and the necessity of consistent airflow direction within the switch.
Outlines the procedure for connecting the switch to its power source, adhering to electrical codes.
Provides guidelines for the proper storage of the switch and its accessories when not in immediate use.
Instructions for inspecting the shipping container and verifying all switch components upon receipt.
A step-by-step guide for carefully unpacking the switch and its associated accessories.
Explains options for physical mounting, including rack shelves, direct mounting, and ReadyRails system compatibility.
Highlights critical safety precautions for rack loading, power, temperature, and airflow during installation.
Details the installation process for the ReadyRails system for 1U front-rack and two-post mounting.
Describes the method for installing rack rails using the tool-less square-hole mounting system.
Explains the procedure for flush-mounting rack rails in a two-post rack configuration.
Details the steps for center-mounting rack rails in a two-post rack configuration.
Describes the process of installing rack rails using a four-post threaded mounting system.
Guides on sliding the switch into the prepared rack rails for 1U and four-post configurations.
Provides instructions for attaching the 1U switch rails to the switch unit itself.
Specific instructions for installing the S5296F-ON model in a four-post rack assembly.
Discusses safety considerations pertinent to mounting equipment in a four-post rack.
Details the procedure for connecting the ground cable to ensure proper grounding of the switch.
Guides on the correct procedure for installing optical transceivers into the switch's optical ports.
Explains the safe method for removing optical transceivers from the switch ports.
Covers pre-power-on checks and the initial startup sequence for the installed switch.
Provides post-installation guidance, including software configuration and documentation references.
Outlines the steps for removing and replacing an existing switch with a new unit.
Lists the available power supply options and their characteristics for the S5200F-ON Series switch.
Details the procedure for installing both AC and DC power supply units into the switch chassis.
Explains the specific wiring and connection steps for DC power supplies to the power source.
Identifies the S5200F-ON Series switch's fan modules and their types.
Describes the process of installing fan modules, emphasizing the importance of matching airflow directions.
Guides on connecting and using the RS-232 console port for initial switch management.
Details the procedure for connecting and using the MicroUSB-B console port for switch management.
Explains how to mount USB storage devices for file transfers and OS installation.
Covers the switch's POST process and the Grub bootloader selection for OS installation.
Presents an example of the Grub bootloader menu, showing OS installation options.
Provides examples of ONIE commands for OS installation and discovery.
Instructions on using `onie-sysinfo` to verify the correct operation of the ONIE environment.
Describes ONIE's methods for locating and installing operating systems, including manual installation.
Details the physical dimensions, weight, and clearance requirements for the switch models.
Lists the IEEE standards that the S5200F-ON Series switch complies with for network functionality.
Covers various agency compliance statements, including FCC and EU EMC directives.
States the FCC compliance for Class A digital devices and operational conditions.
Confirms the product's conformity with the EU EMC directive for electromagnetic compatibility.
Explains Japan's VCCI compliance for Class A equipment and potential interference issues.
Details Korean compliance certifications relevant to the switch's radio and communication equipment standards.
Lists key safety standards and certifications, such as UL and CSA compliance for the product.
Provides information on emissions and immunity standards related to electromagnetic compatibility.
Offers guidance on responsible recycling and disposal of the switch according to local and national regulations.
Directs users to the Dell EMC support website for technical documentation, software, and assistance.
To Next Page
General