Dell EMC S5232F-ON - Specifications; Chassis physical design

Specications
This section lists the S5200F-ON Series (S5232F-ON, S5248F-ON, and S5296F-ON) switch specications.
CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).
CAUTION: Lithium battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same
or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.
NOTE: For RoHS information, see Restricted Material Compliance.
Topics:
• Chassis physical design
• IEEE standards
• Agency compliance
• USA Federal Communications Commission statement
• European Union EMC directive conformance statement
• Japan VCCI compliance for class A equipment
• Korean certication of compliance
• Safety standards and compliance agency certications
• Electromagnetic compatibility
• Product recycling and disposal
Chassis physical design
Table 7. Chassis physical design
Parameter Specications
Height
S5232F-ON: 1.72 inches (43.6 mm)
S5248F-ON: 1.72 inches (43.6 mm)
S5296F-ON: 3.42 (87 mm)
Width
S5232F-ON: 17.1 inches (434 mm)
S5248F-ON: 17.1 inches (434 mm)
S5296F-ON: 16.6 inches (422 mm)
Depth
S5232F-ON: 18.1 inches (460 mm)
S5248F-ON: 18.1 inches (460 mm)
S5296F-ON: 20.1 inches (511 mm)
Chassis weight with factory-installed components
S5232F-ON: 21.6 lbs (9.8 kg)—PSUs and fans
8
50 Specications