Need help?Do you have a question about the Dell EMC PowerSwitch N3224T-ON and is the answer not in the manual?
General| Model | N3224T-ON |
|---|---|
| Switch Type | Managed |
| Ports | 24 x 10/100/1000Base-T |
| Switching Capacity | 128 Gbps |
| Operating Temperature | 0°C to 45°C |
| MAC address table size | 16K |
| PoE+ | Yes |
| Input voltage | 100-240 VAC |
| Storage Temperature | -40°C to 70°C |
| Management | SNMP |
| Operating system | Dell Networking OS |
| Dimensions (cm) | 44.2 x 44.0 x 4.4 cm |
| Humidity | 10% to 90% (non-condensing) |
| Dimensions (in) | 1.75 x 17.3 x 16.9 |
| Weight (kg) | 6.8 kg |
Instructions on inspecting the container and unpacking the switch and included items.
Detailed steps for carefully unpacking the switch and its accessories.
Discusses rack mounting options, including default two-post system and optional ReadyRail systems.
Instructions for attaching a ground cable to the switch for proper grounding.
Steps and recommendations for starting up the switch after installation.
Steps for uninstalling and replacing a switch with an identical unit.
Procedure to uninstall an existing OS before installing a new one using ONIE.
Instructions for installing a Network Operating System (NOS) using ONIE.
To Next Page