Need help?Do you have a question about the Dell EMC N3048EP-ON and is the answer not in the manual?
General| Model | N3048EP-ON |
|---|---|
| Switching Capacity | 176 Gbps |
| Power over Ethernet (PoE) | Yes |
| PoE+ | Yes |
| Total PoE Budget | 740 W |
| PoE+ Power Budget | 740 W |
| Power Supply | Dual, hot-swappable |
| Jumbo Frame Support | Yes |
| Jumbo Frame Size | 9216 bytes |
| Input Voltage | 100-240 VAC |
| Manageable | Yes |
| Type | Switch |
| Product Type | Switch |
| Layer | L2/L3 |
| Ports | 48 x 10/100/1000BASE-T + 4 x 10GbE SFP+ |
| MAC Address Table Size | 32000 |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Operating Humidity | 10% to 90% (non-condensing) |
Details device characteristics and modular hardware configurations for the switches.
Explains power consumption and budget for N3024EP-ON and N3048EP-ON PoE switches.
Describes the cooling fan system for the N3000ET-ON/N3000EP-ON switch.
Instructions for physically mounting the switch in a rack.
Detailed steps for securing the switch into a rack using mounting brackets.
Guide to stacking up to 12 switches high using mini-SAS ports.
Steps to connect a computer to the switch's console port for initial setup.
Procedure for connecting the switch to AC or DC power sources.
Describes the power-on self-test (POST) and boot process of the switch.
Details the initial setup, including enabling remote management.
Illustrates setup with example sessions and the Easy Setup Wizard.
To Next Page