• One RJ-45 serial port
• One serial management USB Type-A port for more le storage
• Four-core Intel Denverton central processing unit (CPU) system with 16GB SDRAM and 64GB SSD
• One 10/100/1000BaseT Ethernet management port
• Temperature monitoring
• Software-readable thermal monitor
• Real time clock (RTC) support
• Two hot-plug redundant power supplies
• Power management monitoring
• Four hot-pluggable replaceable fan modules
• Two-hole ground lug
• S5296F-ON—USB male-female extension cable
• Switch:
– S5232F-ON—Standard 1U switch
– S5248F-ON—Standard 1U switch
– S5296F-ON—Standard 2U switch
Physical dimensions
The S5200F-ON Series switch have the following physical dimensions:
• S5232F-ON—one rack unit:
– 17.1 x 18.1 x 1.72 inches (W x D x H)
– 434 x 460 x 43.6 mm (W x D x H)
• S5248F-ON—one rack unit:
– 17.1 x 18.1 x 1.72 inches (W x D x H)
– 434 x 460 x 43.6 mm (W x D x H)
• S5296F-ON—two rack units:
– 16.6 x 20.1 x 3.42 inches (W x D x H)
– 422 x 511 x 87 mm (W x D x H)
LED display
The S5200F-ON Series switch includes LED displays on the I/O side of the switch. This section describes open networking installation
environment (ONIE) LED behaviors. Some LED behaviors may change after you install your software.
10
S5200F-ON Series switch
To Next Page
Loading...
Need help?
General