Using Your Projector 23
11 Page up Press to move to previous page.
NOTE: The Mini USB-B cable must be
connected if you want to use the Page Up
feature.
12 Page down Press to move to next page.
NOTE: The Mini USB-B cable must be
connected if you want to use the Page Down
feature.
13 VGA Press to choose VGA source.
14 Source Press to switch between Analog RGB, Composite,
Component (YPbPr, via VGA), and S-video
sources.
15 Up Press to navigate through the On-Screen Display
(OSD) Menu items.
16 Left Press to navigate through the On-Screen Display
(OSD) Menu items.
17 Enter Press to confirm the selection.
18 Menu Press to activate the OSD.
19 Down Press to navigate through the On-Screen Display
(OSD) Menu items.
20 Freeze Press to pause the screen image.
21 Blank Press to hide/show the image.
22 Keystone adjustment Press to adjust image distortion caused by tilting
the projector (+40/-40 degrees).
23 Keystone adjustment Press to adjust image distortion caused by tilting
the projector (+40/-40 degrees).
To Next Page
Loading...
Need help?
General
