Clear any obstructions
between the sound bar and
the user.
• In aux-in mode, ensure that
the 3.5 mm plug is
completely inserted in the
aux-in port of the sound bar
or audio source.
• Set the Windows audio
balance controls for left and
right speaker.
• Clean and reseat all cables.
• Test the sound bar using
another audio source (for
example, a portable CD
player or an MP3 player).
Clear any obstructions
between the sound bar and
the user.
• Turn the volume to a higher
level by pressing the +
button on the sound bar.
• Set all Windows volume
controls to their maximum.
• Increase the volume of the
audio application.
• Test the sound bar using
another audio source (for
example, a portable CD
player or an MP3 player).
Make sure that the aux-in
cable is properly plugged in
the sound bar aux-in port
to the aux-out jack of the