Steps
To install the palmrest perform the post-requisites.
Next steps
1. Install the
keyboard.
2. Install the
power-button assembly.
3. Install the power-adapter port.
4. Follow the procedure from step 3 to step 24 in Installing the system board.
5. Install the right I/O-board.
6. Install the keyboard-controller board.
7. Install the
touchpad.
8. Install the speakers.
9. Install the display assembly.
10.Install the rear I/O-cover.
11. Install the
M.2 2230 solid-state drive. (if applicable)
12. Install the M.2 2280 solid-state drive. (if applicable)
13. Install the battery.
14. Install the base cover.
15.Follow the procedure in After working inside your computer.
64
To Next Page
Loading...
Need help?
General