Operating the Display | 53
2. In the computer’s IP Properties tab, specify an IP Address by selecting Use the following
IP Address and enter the following values: For IP Address: 10.0.50.101 and for Subnet Mask:
255.0.0.0 (leave all other entries as blanks).
3. The IP Address configuration would now look like this:
To access and use the web management tool, follow these steps:
1. Open a web browser and type the display’s IP Address (10.0.50.100) in the address bar.
2. The log-in page opens. Enter the Administrator Password to continue.
To Next Page
