Setting Up the Monitor 31
Connecting USB cable
After you have completed connecting the VGA / DP / HDMI / MHL cable, follow
the procedures below to connect the USB cable to the computer and complete
your monitor setup:
1. Connect the upstream USB port (cable supplied) to an appropriate USB
port on your computer. (See Side view for details.)
2. Connect the USB peripherals to the downstream USB ports on the
monitor.
3. Plug the power cables for your computer and monitor into a nearby
outlet.
4. Turn on the monitor and the computer. If your monitor displays an image,
installation is complete. If it does not display an image, see Solving
Problems.
NOTE: The graphics are used for the purpose of illustration only. Appearance on the
computer may vary.
To Next Page
Loading...
