Dell C7017T - Page 37

Operating the Monitor 37
Input Source Use the Input Source menu to select between different video
signals that may be connected to your monitor.
VGA
Select VGA input when you are using the analog (VGA)
connector. Push
to select the VGA input source.
DP
Select DP input when you are using the DP connector. Push
to select the DP input source.
HDMI1/MHL
Select HDMI1/MHL input when you are using the HDMI1/MHL
connector. Push
to select the HDMI1/MHL input source.
HDMI2
HDMI3
Select HDMI2 or HDMI3 input when you are using the HDMI2 or
HDMI3 connector. Push
to select the HDMI2 or HDMI3 input
source.
Auto Select
Select Auto Select to scan for available input signals.
Reset Input
Source
Resets your monitor’s Input Source settings to the factory
defaults.