Dell C7520QT - Setting Up the Display; Connecting Your Display

Setting Up the Display | 25
Setting Up the Display
Connecting Your Display
WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions.
To connect your display to the computer:
1. Turn o your computer.
2. Connect the HDMI/DP/VGA/USB cable from your display to thecomputer.
3. Switch on your display.
4. Select the correct input source at Display OSD Menu and turn on your computer.
Optiplex (Optional)
Attaching the Optiplex
• Open the carton, take out the Optiplex holder.
1. Remove cable cover.
2. Insert the Optiplex PC and power adapter into
the respective compartments.
3. Plug in the cables and route the cables using the
cable management hooks that is within the PC
box holder.