eDP Cable Reassembly Steps
1. Connectthecameracabletothecamera.
2. ReroutetheeDPcabletoitsroutingchannel.
3. Reapplytheclothandsilvertapes.
4. Reinstallthepreremovalpart(s)indescendingorder.
eDP Cable Validation Steps
1. Poweronthesystemandensurethesystembootsupproperly.
LCDCover
LCD Cover Disassembly Steps
1.
PreRemovalInstructions
BeforeremovingtheLCDCover:
1.Duringinstallationorremovalofanyhardwarealwaysensurealldataisbackedupproperly.
2.Disconnectanytelephone,network,orUSBcablesfromthecomputer.
3.Disconnectthecomputerandallattacheddevicesfromtheirelectricaloutlets.
4.RemovetheBottomCover,Battery,M.2SSD,WLANCard,CPUFan,HeatSink,SystemBoard,LCDAssembly,HingeCover,LCDBezel,Camera,LCDHinges,
LCDPanel,eDPCable.
2. Afteryou'vecompletedthepreremovalparts,what'sleftwouldbetheLCDcoverasshownbelow.
TheLCDcoverassemblyincludestheantennacables.