To Next Page
C
Candace LewisAug 28, 2025
What to do if Dell D10U says 'Operating System Not Found'?
- WWilliam WellsAug 29, 2025
If you receive an 'Operating System Not Found' error on your Dell Desktop, reinstall the operating system.
What to do if Dell D10U says 'Operating System Not Found'?
If you receive an 'Operating System Not Found' error on your Dell Desktop, reinstall the operating system.
How to fix 'No Boot Device Available' on Dell D10U?
If your hard drive is your boot device, make sure that the drive is installed, properly seated, and partitioned as a boot device.
What to do if Dell D10U Desktop says 'Not Enough Memory or Resources'?
If you receive a 'Not Enough Memory or Resources' error on your Dell Desktop, it means you have too many programs open. Close all windows and then try to open the program you want to use.
What to do if file is too large for destination drive on Dell D10U?
If your Dell Desktop says that the file being copied is too large for the destination drive, try copying the file to a different disk or use a larger capacity disk.
What does the alert 'Previous attempts at booting this system have failed' mean on a Dell D10U Desktop?
The computer failed to complete the boot routine three consecutive times for the same error on your Dell Desktop.
What to do if Dell Desktop displays 'Hard-Disk Drive Configuration Error'?
If your Dell Desktop shows a 'Hard-Disk Drive Configuration Error', shut down the computer, remove the hard drive, and boot the computer from an optical drive. Then, shut down the computer, reinstall the hard drive, and restart the computer. Run the Hard Disk Drive tests in Dell Diagnostics.
How to fix auxiliary device failure on Dell D10U?
An auxiliary device failure on your Dell Desktop may be due to a faulty touchpad or external mouse. If using an external mouse, check the cable connection. Also, ensure the Pointing Device option is enabled in the System Setup program.
What causes unexpected interrupt in protected mode on Dell D10U?
An unexpected interrupt in protected mode on your Dell Desktop may be due to a malfunctioning keyboard controller or a loose memory module.
What to do if Disk C failed initialization on my Dell Desktop?
If your Dell Desktop reports 'Disk C: Failed Initialization', the hard drive failed to initialize. Run the hard drive tests in Dell Diagnostics.
What to do if my Dell D10U Desktop shows hard-disk drive controller failure 0?
If your Dell Desktop displays a 'Hard-Disk Drive Controller Failure 0' error, it means the hard drive isn't responding to commands. Here’s a possible solution: * Shut down the computer. * Remove the hard drive. * Boot the computer from an optical drive. * Shut down the computer again. * Reinstall the hard drive. * Restart the computer. If the issue persists, try another drive.
General| Model | D10U |
|---|---|
| RAM Technology | DDR3 |
| Operating System | Windows 7 |
| Optical Drive | DVD-RW |
| USB Ports | 6 (2 front, 4 rear) |
| Network | Gigabit Ethernet |
| Storage | HDD |
