Dell D10U - Removing and installing components; Recommended tools; Screw information

Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Topics:
• Recommended tools
• Screw information
• Antenna
• Cover
• Coin cell battery
• Storage
• WLAN card
• M.2 PCIe SSD
• System fan
• Speaker
• Memory module
• Heat sink
• Processor
• System board
Recommended tools
The procedures in this document require the following tools:
● Small flat blade screwdriver
● Phillips # 1 screwdriver
● Small plastic scribe
Screw information
This topic lists the screw information.
Table 1. Screw size list
Component Secured to Screw type Quantity
Top cover
Chassis(Bottom cover) #6-32*9.3 1
System Board
Chassis #6-32*5.4 3
HDD support bracket
Chassis #6-32*5.4 1
SDD card and WiFi card
Stand-off
Chassis M3X4 2
Thermal Module
Heatsink(35W)
Chassis M3 4
System Speaker
Thermal Module Fan M2.5X4 2
AUX antenna
Chassis M3X3 1
2
Removing and installing components 9