3 Install the Cover.
4 Follow the procedure in After working inside your computer.
Optical drive
Removing optical drive assembly
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a Cover
3 To remove the slim optical drive:
a Disconnect the data cable and power cable from the connectors on the optical drive assembly [1].
NOTE
: You must unroute the cables from the tabs under the drive cage to allow you to disconnect the cables from the
connectors.
b Remove the two (M2x2) screws that secure the optical drive assembly to the computer [2].
34
Removing and installing components
To Next Page
Loading...
