About this task
The following images indicate the location of the powered graphical processing unit and provides a visual representation of the
installation procedure.
Steps
1. Align the powered GPU with the PCI-Express card connector on the system board.
2. Using the alignment post, connect the powered GPU in the connector and press down firmly. Ensure that the powered GPU
is firmly seated.
3. Connect the power cable to the connector on the powered GPU.
4. Lift the pull tab to close the PCIe door.
Next steps
1. Install the fan duct.
2. Install the side cover.
3. Follow the procedure in after working inside your computer.
Removing and installing components
37
To Next Page
Loading...
