Setting Up and Using Your Computer 13
Setting Up a Home and Office Network
Connecting to a Network Adapter
Before you connect your computer to a network, the computer must have a network adapter
installed and a network cable connected to it.
To connect a network cable, perform the following steps.
NOTE: Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.
1
Connect the network cable to the network adapter connector on the back of your computer.
NOTE: Do not use a network cable with a telephone wall jack.
2
Connect the other end of the network cable to a network connection device, such as a
network wall jack.
USB printer
cable
USB connector on computer
USB connector
on printer
To Next Page
Loading...
