Removing and Installing Parts 81
2
Grasping the lever on the sliding plate, pull the sliding plate to the right until it snaps into the
open position.
NOTE: This sliding plate secures and releases the drive panel and helps to secure the drives.
3
By pushing from the inside and pivoting the drive panel to the left, you can release the drive panel
from its side hinges.
4
Set the drive panel aside in a secure location.
Removing the Drive-Panel Insert
1
Turn the drive panel sideways and find the tip of the drive-panel insert tab that latches over a tab on
the right side of the drive panel.
2
Pull the inner tip of the drive-panel insert tab away from the drive panel.
3
Pivot the drive-panel insert out and away from the drive panel.
4
Set the drive-panel insert aside in a secure location.
drive panel
drive panel insert
drive panel
insert tab
WD846bk2.book Page 81 Thursday, September 14, 2006 2:40 PM
To Next Page
Loading...
