Removing and Installing Parts 89
Floppy Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.
NOTE: If you are adding a floppy drive, see "Installing a Floppy Drive" on page 91.
Removing a Floppy Drive
1
Follow the procedures in "Before You Begin" on page 59.
2
Remove the drive panel (see "Removing the Drive Panel" on page 80).
power cable
data cable
WD846bk2.book Page 89 Thursday, September 14, 2006 2:40 PM
To Next Page
Loading...
