2
Using The System Setup and Boot
Manager
System Setup enables you to manage your system hardware and specify BIOS-level options.
The following keystrokes provide access to system features during startup:
Keystroke
Description
<F2>
Displays the System Setup page.
<F10>
Enters System Services and starts Lifecycle
Controller, which supports systems management
features such as operating system deployment,
hardware diagnostics, firmware updates, and
platform configuration, using a graphical user
interface. The feature set available in Lifecycle
Controller is determined by the iDRAC license
purchased. For more information, see Related
Documentation topic.
<F11>
Enters the BIOS Boot Manager.
From the System Setup, you can:
• Change the NVRAM settings after you add or remove hardware
• View the system hardware configuration
• Enable or disable integrated devices
• Set performance and power management thresholds
• Manage system security
You can access the System Setup using the:
• Standard graphical browser, which is enabled by default
• Text browser, which is enabled using Console Redirection
To enable Console Redirection, in System Setup, select System BIOS → Serial Communication screen
→ Serial Communication, select On with Console Redirection.
NOTE: By default, help text for the selected field is displayed in the graphical browser. To view the
help text in the text browser, press <F1>.
11
To Next Page
Loading...
