Item Indicator, Button, or
Connector
Icon Description
If the system stops responding during POST, press
and hold the system ID button for more than five
seconds to enter BIOS progress mode.
To reset iDRAC (if not disabled in the iDRAC
Settings option) press and hold the button for
more than 15 seconds.
9 Power supply 250 W AC power supply.
10 Retention clip Secures the power cable.
NIC Indicator Codes
Figure 3. NIC Indicator
1. link indicator 2. activity indicator
Indicator Indicator Code
Link and activity
indicators are off
The NIC is not connected to the network.
Link indicator is
green
The NIC is connected to a valid network at its maximum port speed (1 Gbps or 10
Gbps).
Link indicator is
amber
The NIC is connected to a valid network at less than its maximum port speed.
Activity indicator is
blinking green
Network data is being sent or received.
Related Documentation
WARNING: See the safety and regulatory information that shipped with your system. Warranty
information may be included within this document or as a separate document.
Your product documentation includes:
Dell DL1000
Appliance -
Getting Started
Guide
Provides information about system features and setting up your system, and
technical specifications. This document is available online at dell.com/
powervaultmanuals .
9
To Next Page
Loading...
