Dell E1913 Safety Information

Safety, Environmental, and Regulatory Information
5
Protecting Against Electrostatic
Discharge
Electrostatic discharge (ESD) events can harm electronic
components inside your equipment. To prevent ESD damage,
you should discharge static electricity from your body before
you interact with any of your equipment’s internal electronic
components by touching a metal grounded object, such as
an unpainted metal surface on your computer’s I/O panel.
In addition, as you work inside the equipment,
periodically discharge any static charge your body may
have accumulated.
General Power Safety
Observe the following guidelines when connecting your
equipment to a power source:
• Check the voltage rating before you connect the equipment
to an electrical outlet to ensure that the required voltage
and frequency match the available power source.
• Your device is equipped with either an internal power
source or an external adapter. For internal power sources,
your device is equipped with one of the following:
– An auto-sensing voltage circuit - Devices with
an auto-sensing voltage circuit do not have
a voltage selection switch on the back panel and
automatically detect the correct operating voltage.
OR
– A manual voltage selection switch - Devices with a
voltage selection switch on the back panel must be
manually set to operate at the correct operating
voltage. Set the switch to the position that most
closely matches the voltage used in your location.
NOTE: The switch on your system may be different
than the one pictured.
CAUTION: To help avoid damaging a computer with a
manual voltage selection switch, set the switch for the
voltage that most closely matches the AC power available
in your location.
• To prevent electric shock, plug the equipment power cables
into properly grounded electrical outlets. If the equipment is
provided with a 3-prong power cable, do not use adapter
plugs that bypass the grounding feature, or remove the
grounding feature from the plug or adapter.
• To remove a portable computer from all power sources,
turn the computer off, disconnect the AC adapter from the
electrical outlet, and remove any battery installed in the
battery bay or module bay.

Dell E1913 Specifications

General

3D	No
Panel type	TN+Film
Aspect ratio	16:10
Display diagonal	19 \
Display resolution	1440 x 900 pixels
Display technology	LED
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	-
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1440 x 900
On/off switch	Yes
HDMI ports quantity	0
Panel mounting interface	100 x 100 mm
Input current	1.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	23 W
Power consumption (standby)	0.5 W
Power consumption (typical)	18 W
Safety	Product safety, EMC and environmental datasheets
Certification	TCO certified displays
Product color	Black
Market positioning	Business
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 10668 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 80 %
Package weight	3900 g
Sustainability certificates	EPEAT Gold, ENERGY STAR

Weight and Dimensions

Depth (with stand)	163.5 mm
Height (with stand)	372.8 mm
Depth (without stand)	50 mm
Width (without stand)	443.8 mm
Height (without stand)	290.8 mm
Weight (without stand)	2540 g