Figure 32. Cabling—x8 hard-drive backplane with two PERC cards
1. SATA optical drive connector on system
board
2. SATA tape drive connector on system
board
3. SAS connector on PERC card 4. PERC card
5. SAS connector on PERC card 6. PERC card
7. system board 8. x8 backplane
9. SAS B connector on backplane 10. SAS A connector on backplane
11. SAS tape drive 12. SATA tape drive
13. optical drive
Related Links
Removing the front bezel
Installing the hard-drive backplane
81
To Next Page
Loading...
