Dell E30S001 - Removing a Hard-Drive Adapter from a Hard-Drive Carrier; Removing a Hard Drive from a Hard-Drive Carrier

Figure 22. Removing and installing a hard-drive adapter into a 3.5 inch hard-drive carrier
1. 3.5 inch hard-drive carrier 2. screw (5)
3. hard-drive adapter 4. 2.5 inch hard drive
Removing a hard-drive adapter from a hard-drive carrier
Prerequisites
1. Ensure that you read the Safety instructions.
2. Keep the #2 Phillips screwdriver ready.
Steps
1. Remove the screws from the slide rails on the hard-drive carrier.
2. Lift the hard-drive adapter out of the hard-drive carrier.
Removing a hard drive from a hard-drive carrier
Prerequisites
1. Keep the #2 Phillips screwdriver ready.
2. Remove the hard-drive carrier from the system.
Steps
1. Remove the screws from the slide rails on the hard-drive carrier.
2. Lift the hard drive out of the hard-drive carrier.
69