Figure 53. Removing and installing a non-redundant AC power supply
1. screw 2. power supply unit cage
3. non-redundant power supply 4. standoff on the chassis
5. P1 cable connector 6. P2 cable connector
7. P3 cable connector 8. backplane connector
Installing a non-redundant AC power supply
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Unpack the new power supply.
125
To Next Page
Loading...
