Dell Edge Gateway 3000 Series User Manual

Table 8. Basic commands (continued)
Action Ubuntu Core 16
To change the time zone to your location, run the command:
admin@localhost:~$ sudo timedatectl --help
Root-user credential Run the command:
admin@localhost:$ sudo su -
Returns:
$ admin@localhost:~# sudo su –
$ root@localhost:~#
Identifying the System Service Tag Run the command:
admin@localhost:$ cat /sys/class/dmi/id/
product_serial
The system tag is printed.
Identifying the system vendor Run the command:
admin@localhost:$ cat /sys/class/dmi/id/
board_vendor
returns
Dell Inc.
The system tag is printed.
Ubuntu Network Manager
Network-Manager is a native Ubuntu Snappy connection manager. The application can be used to configure the Edge Gateway
so that it's automatically-detected and connected to the network. The application can be used to configure multiple network
devices.
A command-line utility nmcli is included with Network-Manager to support non-graphical user interface configurations.
NOTE: For more information about Network Manager, see https://wiki.archlinux.org/index.php/NetworkManager
Connecting through WWAN
NOTE:
For more information on configuring and connecting through WWAN, see https://docs.ubuntu.com/core/en/
stacks/network/network-manager/docs/configure-cellular-connections.
1. Check if a modem is present and identify the modem index number.
$ sudo modem-manager.mmcli –L
2. Check the modem status and identify the primary port.
$ sudo modem-manager.mmcli -m <x>
NOTE:
<x> refers to the modem index number. Replace <x> with the modem index number after running the command
at step 1.
52 Setting up the operating system

Dell Edge Gateway 3000 Series Specifications

General

Brand	Dell
Model	Edge Gateway 3000 Series
Category	Gateway
Language	English