EasyManua.ls Logo

Dell EMC PowerVault MD3820i - Installing Array Components; Recommended Tools; Front Bezel (Optional)

Dell EMC PowerVault MD3820i
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installing Array Components
Topics:
Recommended Tools
Front Bezel (Optional)
Physical Drives
RAID Controller Module
RAID Controller Module Backup Battery Unit
Power Supply or Cooling Fan Module
Control Panel
Backplane
Recommended Tools
You may need the following items to perform the procedures in this section:
Key to the system keylock
#2 Phillips screwdriver
Wrist grounding strap
Front Bezel (Optional)
Removing the Front Bezel
1. Using the system key, unlock the front bezel (if locked).
2. Lift the release latch next to the keylock.
3. Rotate the left end of the bezel away from the front panel.
4. Unhook the right end of the bezel and pull the bezel away from the system.
Figure 8. Removing and Installing the Front Bezel
1.
bezel 2. keylock
3
Installing Array Components 15

Table of Contents

Related product manuals