Dell EMC VxFlex Ready Node - Install the System in the Rails; Slide the System into the Cabinet

Figure 13 Install the system in the rails
4. Push the system inward until the lock levers click into place.
5. Pull the blue slide release lock tabs forward on both rails and slide the system into the cabinet. The slam latches
will engage to secure the system in the cabinet.
Note:
Ensure that the inner rail slides completely into the middle rail. The middle rail locks if the inner rail is
not fully engaged.
Figure 14 Slide the system into the cabinet
R640 Equipment Installation
34 Dell EMC VxFlex Ready Node Server Installation Guide