Dell EMC VxFlex Ready Node - Install the System in the Rails; Slide the System into the Cabinet

Figure 30 Install the system in the rails
4. Push the system inward until the lock levers click into place.
5. Pull the blue slide release lock tabs forward on both rails and slide the system into the cabinet. The slam latches
will engage to secure the system in the cabinet.
Note:
Ensure that the inner rail slides completely into the middle rail. The middle rail locks if the inner rail is
not fully engaged.
Figure 31 Slide the system into the cabinet
R740XD Configuration Equipment Installation
64 Dell EMC VxFlex Ready Node Server Installation Guide