Dell EqualLogic PS Series - Installing a PS6000 Array; Before You Begin

Installation and Setup Installing a PS6000 Array
2–4
Installing a PS6000 Array
Use these instructions if you have a PS6000 array, which is a 3U array with 16
drive slots, two power supply and cooling modules, and two control modules.
Figure 2-2: PS6000 Array - Front View
Figure 2-3: PS6000 Array - Rear View
Before You Begin
You must meet these prerequisites before installing a PS6000 array:
• Make sure the array and installation location meet the environmental
requirements. See Environmental Requirements on page 2-5.
• Gather all the required hardware. See Shipping Box Contents and Required
Hardware on page 2-6.
• Rack mount the array. See Rack Mount Requirements on page 2-7.