Installation and Setup Installing a PS6500 Array
2–19
• Connect two power supply and cooling modules to UPS systems and connect
the other module to a different source of power.
Figure 2-11: Recommended Power Configuration - PS6500
You must use the cable management system to organize your power (and network)
cables. The cable management system also enables you to open the chassis cover
without dislodging the cables.
The cable management system consists of two wire assemblies, as shown in
Figure 2-12:
• One wire assembly has three arms, three clamps, and six fabric hook-and-loop
fasteners.
• The other wire assembly has one arm, two clamps, and three fabric hook-and-
loop fasteners.
To Next Page
Loading...
