Dell
PowerEdge R210 Technical Guide 21
4.9 Rails
ReadyRails™ static rails for tool-less mounting in 4-post racks with square or
unthreaded round holes or tooled mounting in 4-post threaded and 2-post racks
The R210 rails must first be attached to the sides of the system and then inserted into
the cabinet members installed in the rack. For additional information regarding rail
options for the R210, see Section 13.
Figure 7. R210 Static Rails
Figure 8. R210 Mounted In Four-Post Square-Hole Rack
To Next Page
Loading...
