Next steps
1. Install the power button.
2. Install the fan and heat-sink assembly.
3. Install the USB board.
4. Install the ethernet and audio board.
5. Install the system board.
6. Install the keyboard-controller board, if applicable.
7. Install the power adapter port.
8. Install the speakers.
9. Install the memory module.
10. Install the wireless card.
11. Install the solid-state drive.
12. Install the display assembly.
13. Install the touchpad.
14. Install the rear cover.
15. Install the battery.
16. Install the base cover.
17. Follow the procedure in After working inside your computer.
86
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
