About this task
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the system board.
2. Install the power-adapter port.
3. Install the display assembly.
4. Install the heat sink.
5. Install the speakers.
6. Install the touchpad.
7. Install the I/O board.
8. Install the solid-state drive.
9. Install the right fan.
10. Install the left fan.
11. Install the wireless card.
12. Install the memory modules.
13. Install the battery.
14. Install the base cover.
15. Follow the procedure in After working inside your computer.
52
Removing and installing components
To Next Page
Loading...
