Table 1. Screw list (continued)
Component Secured to Screw type Quantity Screw image
USB 3.1 Type-C port
bracket
System board M2x3 2
Hinge brackets Palm-rest and keyboard
assembly
M2.5x5 4
Hinge brackets Display panel M2.5x2.5 Big Head 12
Hinge brackets Display panel M2x2.5 2
I/O board Palm-rest and keyboard
assembly
M2x3 2
System board KB Support M2L2 Big Head 2
Base cover
Removing the base cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
About this task
The following images indicate the location of the base cover and provide a visual representation of the removal procedure.
Removing and installing components
9
To Next Page
Loading...
