Replacing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Slide the tabs on the base cover into the slots on the palmrest and
keyboard assembly and snap the base cover into place.
2 Replace the screws that secure the base cover to the palmrest and
keyboard assembly.
3 Replace the screw cover into its slot on the base cover.
18
To Next Page
Loading...
