Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Post-requisites
1 Replace the battery.
2 Replace the base cover.
Procedure
1 Place the power-adapter port into the slot on the palmrest and keyboard
assembly.
2 Align the screw hole on the power-adapter port with the screw hole on
the palmrest and keyboard assembly.
3 Replace the screw that secures the power-adapter port to the palm rest
and keyboard assembly.
4 Connect the power-adapter port cable to the system board.
27
To Next Page
Loading...
