Removing the display
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the wireless card.
Procedure
1 Disconnect the speaker cable from the system board.
2 Remove the antenna cable from the routing guide on the right speaker.
3 Peel off the tapes from the antenna cables and coin-cell battery.
4 Peel off the tape from the sensor-board cable.
56
To Next Page
Loading...
