Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Using the alignment posts on the palmrest and keyboard assembly, place the
speakers on the palmrest and keyboard assembly.
2 Route the speaker cable through the routing guides on the palmrest and
keyboard assembly.
3 Adhere the tapes that secure the speaker cable to the palmrest and keyboard
assembly.
4 Route the power and volume-buttons board cable through the routing guides on
the speaker.
5 Connect the speaker cable to the system board.
Post-requisites
1 Replace the battery.
2 Replace the base cover.
44
To Next Page
Loading...
