Dell Inspiron 13 7000 Series - Replacing the Display Cable; Procedure; Post-Requisites

Removing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the display assembly.
4 Follow the procedure from step 1 to step 2 in “Removing the display panel”.
5 Follow the procedure from step 1 to step 2 in “Removing the camera”.
6 Remove the Windows-button board.
Procedure
1 Peel off the tape, lift the latch and disconnect the display cable from the display
panel.
94