Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Connect the camera cable to the camera module.
2 Using the alignment post place the camera module on the display bezel and snap
it into place.
Post-requisites
1 Follow the procedure from step 4 to step 5 in “Replacing the display panel”.
2 Replace the display assembly.
3 Replace the battery.
4 Replace the base cover.
90
To Next Page
Loading...
