Dell Inspiron 13 7000 Series - Removing the Display Hinges; Prerequisites; Procedure

Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Place the display panel on a flat surface.
2 Replace the Windows-button board.
3 Replace the camera.
4 Route the display cable through the routing guides inside the hinge covers.
5 Align the display-panel assembly with the display back-cover and antenna
assembly and gently snap the display back-cover and antenna assembly into
place.
Post-requisites
1 Replace the display assembly.
2 Replace the battery.
3 Replace the base cover.
81