Removing the display hinges
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the display assembly.
4 Follow the procedure from step 1 to step 2 in “Removing the display panel”.
Procedure
1 Place the display-back cover and antenna assembly on a flat surface.
2 Remove the antenna cables from the routing guide on the hinge cover.
3 Remove the screws that secure the display hinges to the display back-cover and
antenna assembly.
4 Peel off the tapes that secure the display hinges to the display back-cover and
antenna assembly.
85
To Next Page
Loading...
