Removing the Palm Rest
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the hard drive.
4 Remove the fan.
5 Remove the keyboard.
6 Remove the base frame.
7 Remove the speakers.
8 Remove the I/O board.
9 Remove the status light board.
10 Remove the display assembly.
Procedure
1 Remove the screws that secure the system board to the palm rest.
2 Remove the power-adapter port from its slot on the palm rest.
79
To Next Page
Loading...
