Dell Inspiron 14 - Removing the I;O Board; Prerequisites; Procedure

Removing the I/O Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery.
2 Remove the base cover.
3 Remove the memory module(s).
4 Remove the wireless card.
5 Remove the hard drive.
6 Remove the keyboard.
7 Remove the palm rest.
Procedure
1 Lift the I/O board from the computer base and turn it over.
2 Lift the latch and, using the pull-tab, disconnect the I/O-board cable
from the I/O board.
49